Basic Info.
Additional Capabilities
Milling, Vacuum
Application
Viscous Fluid, Semisolid
Application Area
Pharmaceutical, Cosmetic, Health Care Products
Certification
CE, ISO, Apragaz PED
Working
Jet Type Homogenizer
Heating Type
Electrical Heating
Size
1100 Mm X600 Mm X 1500mm
Operating type
Continuous Operating
Transport Package
Export Wooden Packing
Product Description
The basal equipment of machine and technical parameters
emulsify mixer mixer:
Working volume: 10L, material: SUS316L stainless steel, electricity heating and water-cooling
Structure: With 3-layer structure, upper and lower end sockets. The upper end socket is connected to the tank body with flange between them. The internal layer of tank body is made of 4 mm thick SUS316L stainless steel and interior polished in 300 MESH (sanitary level). The middle layer of tank body is made of 3 mm thick SUS304 stainless steel and can stand max. working pressure 0.09MPa. The external layer of tank body is made of 2 mm thick SUS304, and exterior polished in 300 MESH (sanitary level). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned over edge arc transition is adopted. The heat preservation layer is made of PU polyurethane foaming.
In the tank, there are 2 mixers:
3.11 Cutting and vortex emulsify mixer: 1.5kw, 0-2800 rpm (frequency control)
3.12 Low-speed frame type scraping mixer: 0.37kw, 0-40 rpm (frequency control)
3.13 Attached units of the tank: Liquid feed inlet with stainless steel pipe filter, additive inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, temperature sensor, CIP cleaning head, dustproof asepsis respiratory device.
3.2 Pretreatment boiler:
1. Volume: oil boiler of 5L and water boiler of 5L one each, material: SUS316L.
2. Structure: open (half-open) type, with mixing.
Detailed Technical requirements:
Effective volumes: oil boiler of 5L, water boiler of 5L, material: SUS316L, 3 layers structure. The material of the inner of tank body is made of 4mm thick SUS316L and interior polished in 300MESH (sanitary level). The middle of the tank body is made of 3 mm thick SUS304 and can stand max working pressure 0.09MPa. The external layer of tank body is made of 2 mm thick SUS304 and exterior polished in 300MESH (sanitary level). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned over edge arc transition is adopted. The heat preservation layer is made of PU polyurethane foaming. In the tank, there is a turbine mixer, 0.12kw reducer and 0-1400 rpm inlet rotary speed. Discharge hole is equipped with butterfly valve of sanitary level and pipeline.
3.3 Vacuum system
1) Adopting vacuum pump, motor power: 90w 220 V.
2) Adopting diaphragm type vacuum gauge, the system vacuity keeps at-0.93 MPa.
3) Adopting 316 L pneumatic butterfly valve to be interlocked with the motor.
3.4 Electric control system
High-speed mixing switch, setting of speed and temperature of main tank, heating switch of main and auxiliary tanks, setting of upper and lower temperature limits of auxiliary tank, mixing switch and speed control of auxiliary tank, control switch of low-speed mixing and vacuum pump, etc. shall be actuated and shown on the control panel. The machine applies low voltage electric appliances from Siemens, home-made high-quality sensor, frequency converter from Delta Corp. All are manual valves and installed in yoke or thread types.
4. Technical Parameters of whole machine
4.1 The whole volume of container:12L
4.2 Service volume of container: 10L
4.3 Min. output:5L
4.4 Standard size:1100 mm x600 mm x 1500mm
4.5 Net weight: 420 kg(only for standard equipment)
4.6 Container: connected with vertical and protruding flange with leading edge, equipped with double jackets.
4.7 Heating by electricity.
Cooling: by letting cold water into the double jacket.
4.8 Service modes of container: atmosphere / vacuum
4.9 Base of container: welded and high-grade mirror polish.
4.10 Upper cover: flanged and liftable.
4.11 The speed of slow-speed mixing system: 0-40 rpm, 0.37kw (frequency control).
4.12 The speed of high-speed homogenizing-mixing system: 0-2800 rpm, 1.5kw (frequency control)
4.13 Installation power of vacuum pump: 90w
4.14 working pressure of container jacket: 0.09pa
4.15 Main installation power: 8kw
4.16 Electric power: 220 V, 50 Hz.
4.17 Allowable fluctuation of voltage: ±5%.
4.18 Protection: general
4.19 Adjustable height of machine frame: ±30mm
4.20 The air suction device for ventilating motor
4.21 Equipment is made according to GMP standard.
4.22 The machine body is fully made of stainless steel SUS304.
4.23 All parts contacted with material are made of stainless steel SUS316L and mirror-polished.
Address:
Development 2nd Rd. Economic Development Zone Ruian City, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
As a professional manufacturer and exporter, DingYi I/E industrial Co., Ltd Engages in the research, design, manufacture and sale of various machines.
Our company was established by bosses of following factories.
The factory specializes in making kinds of pharmaceutical, cosmetic and food machinery, for instance, Vacuum emulsifying mixer, Suppository vacuum emulsifier, Toothpaste making machine, Tube filling and sealing machine, Bottom homogenizing cream mixer, Soft gel preparation system, Dry type granulator, Color mixing machine, CIP cleaning system, Stainless steel mixing and storage vessel, Gel storage tank, Online high-shear emulsifier, Sanitary rotor pump and centrifugal pump, Colloid mill, water and powder mixer Belt conveyor.
We have established our export company to be in charge of export business. Also we can help you
Source any goods you are interested in, as we have cooperative manufactures in our city.
With the unique design, fine quality, excellent function of the product and in-time good service, the company makes you no worries in taking the product.
Our company always contributes to produce products satisfying customers.
We are very pleased to cooperate with you to create our bright future.