Cream Ointment Lotion Hair Color Laboratory Vacuum Emulsifying Mixer Homogenizer (ZRJ-5-D)
|FOB Price:||US $10,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $10,000/ Set|
|Production Capacity:||60 Sets/Year|
|Payment Terms:||L/C, T/T|
- Model NO.: ZRJ-5-D
- Working: Jet Type Homogenizer
- Application: Viscous Fluid, Semisolid
- Application Area: Pharmaceutical,Cosmetic,Health Care Products
- Mixing Drum Shape: Drum
- Operating type: Continuous Operating
- Heating Type: Electrical Heating
- Specification: CE, cGMP
- HS Code: 8479820090
- Mixer Type: Homogenizer
- Stirring Type: Spiral
- Certification: CE, ISO, Apragaz PED
- Layout Type: Verticle
- Additional Capabilities: Milling
- Condition: New
- Transport Package: Export Wooden Packing
- Origin: Zhejiang Wenzhou
The basal equipment of machine and technical parameters
emulsify mixer mixer:
Working volume: 5L, material: SUS316L stainless steel, electricity heating and water-cooling
Structure: With 3-layer structure, upper and lower end sockets. The upper end socket is connected to the tank body with flange between them. The internal layer of tank body is made of 4 mm thick SUS316L stainless steel and interior polished in 300 MESH (sanitary level). The middle layer of tank body is made of 3 mm thick SUS304 stainless steel and can stand max. working pressure 0.09MPa. The external layer of tank body is made of 2 mm thick SUS304, and exterior polished in 300 MESH (sanitary level). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned over edge arc transition is adopted. The heat preservation layer is made of PU polyurethane foaming.
In the tank, there are 2 mixers:
3.11 Cutting and vortex emulsify mixer: 1.5kw, 0-2800 rpm (frequency control)
3.12 Low-speed frame type scraping mixer: 0.37kw, 0-40 rpm (frequency control)
3.13 Attached units of the tank: Liquid feed inlet with stainless steel pipe filter, additive inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, temperature sensor, CIP cleaning head, dustproof asepsis respiratory device.
3.2 Pretreatment boiler:
1. Volume: oil boiler of 5L and water boiler of 5L one each, material: SUS316L.
2. Structure: open (half-open) type, with mixing.
Detailed Technical requirements:
Effective volumes: oil boiler of 5L, water boiler of 5L, material: SUS316L, 3 layers structure. The material of the inner of tank body is made of 4mm thick SUS316L and interior polished in 300MESH (sanitary level). The middle of the tank body is made of 3 mm thick SUS304 and can stand max working pressure 0.09MPa. The external layer of tank body is made of 2 mm thick SUS304 and exterior polished in 300MESH (sanitary level). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned over edge arc transition is adopted. The heat preservation layer is made of PU polyurethane foaming. In the tank, there is a turbine mixer, 0.12kw reducer and 0-1400 rpm inlet rotary speed. Discharge hole is equipped with butterfly valve of sanitary level and pipeline.
3.3 Vacuum system
1) Adopting vacuum pump, motor power: 90w 220 V.
2) Adopting diaphragm type vacuum gauge, the system vacuity keeps at-0.93 MPa.
3) Adopting 316 L pneumatic butterfly valve to be interlocked with the motor.
3.4 Electric control system
High-speed mixing switch, setting of speed and temperature of main tank, heating switch of main and auxiliary tanks, setting of upper and lower temperature limits of auxiliary tank, mixing switch and speed control of auxiliary tank, control switch of low-speed mixing and vacuum pump, etc. shall be actuated and shown on the control panel. The machine applies low voltage electric appliances from Siemens, home-made high-quality sensor, frequency converter from Delta Corp. All are manual valves and installed in yoke or thread types.
4. Technical Parameters of whole machine
4.1 The whole volume of container:8L
4.2 Service volume of container: 5L
4.3 Min. output:3 L
4.4 Standard size:1100 mm x600 mm x 1500mm
4.5 Net weight: 400 kg(only for standard equipment)
4.6 Container: connected with vertical and protruding flange with leading edge, equipped with double jackets.
4.7 Heating by electricity.
Cooling: by letting cold water into the double jacket.
4.8 Service modes of container: atmosphere / vacuum
4.9 Base of container: welded and high-grade mirror polish.
4.10 Upper cover: flanged and liftable.
4.11 The speed of slow-speed mixing system: 0-40 rpm, 0.37kw (frequency control).
4.12 The speed of high-speed homogenizing-mixing system: 0-2800 rpm, 1.5kw (frequency control)
4.13 Installation power of vacuum pump: 90w
4.14 working pressure of container jacket: 0.09pa
4.15 Main installation power: 8kw
4.16 Electric power: 220 V, 50 Hz.
4.17 Allowable fluctuation of voltage: ±5%.
4.18 Protection: general
4.19 Adjustable height of machine frame: ±30mm
4.20 The air suction device for ventilating motor
4.21 Equipment is made according to GMP standard.
4.22 The machine body is fully made of stainless steel SUS304.
4.23 All parts contacted with material are made of stainless steel SUS316L and mirror-polished.
Profession loading and care for customer